The Flash&Go Express hair removal device provides long lasting results in half the time of previous models.
Features & Benefits of the
Flash&Go Express
>>
Faster pulses for faster treatment times – what used to take 20 minutes per
leg, now only takes 10
>>
Safe for even your most uncomfortable areas
>>
300,000 pulses for years of use
>>
No batteries required
>>
One single affordable price
>>
No more buying razors, creams, waxes or gel
>>
Five million happy users confirm that “it works!”
How to use your Flash&Go Express
Silk’nbody hair removal is simple, safe and effective. Here’s how to use your Flash&Go Express for fast, painless, easy hair removal. When used as directed, you may start to see results in as early as two treatments!
Frequency
Start
by using your hair removal device once every two weeks for the first four to
five sessions. After that you will only need to treat the target area once a
month, or as needed. Most users begin to see hair removal results with their
Silk’n system in about three to four sessions (or about six to eight weeks).
After this time, you will notice dramatic changes in your hair structure: it
will become much finer and much thinner. You will also notice that the growth
pattern will slow dramatically. Full hair removal can take up to six months.
How to set up your Flash&Go Express
system
Get
your Flash&Go Express device ready to remove unwanted body hair by
following these steps:
>>
Remove the Flash&Go Express hair removal device and other components from
the box.
>>
Plug the power cord into the Flash&Go Express device socket.
>>
Plug the other end of the power cord into an electrical outlet.
>>
All six LED lights will blink on and off, one after the other, in a circle.
Your Flash&Go Express is now ready to start.
Treating with Flash&Go Express for
the first time
Ready
to begin treatment? Here’s how you can prepare yourself.
>>
The skin should be shaved, clean, dry and free of any powders, antiperspirants
or deodorants.
>>
Press the central button briefly. The Energy Level 1 LED will turn on. About
one second later, the Ready Indicator Light will turn on. The device is now set
to deliver the lowest energy level pulses. It is ready for you to trigger the
first pulse.
>>
If you wish to change the energy level, press the central button quickly and
repeatedly to increase the energy level from 1 to 5 and from 5 directly back to
1, cyclically, until the desired energy level is set. The Energy Level
Indicator Lights will indicate the energy level setting.
>>
Apply the treatment surface to the skin, making sure the skin is spread evenly
and smoothly and the treatment surface is in full contact with the skin. Make
sure the Ready Indicator Light starts blinking slowly.
>>
Press the Pulse Trigger. The device will first determine the color of your
skin. If the color of the skin is light enough for safe application, the device
will flash a pulse of light onto your skin. You will see a bright flash of
light and simultaneously hear a subtle pop sound, which is a normal noise for
the device. You may feel a mild sensation of warmth and tingling. Flash&Go
Express will immediately recharge for the next pulse. After a few seconds
(depending on the set energy level) the Ready Indicator Light will turn on
again and start blinking. If you see no light pulse, and the Ready Indicator
Light blinks rapidly, this is now the skin color warning indicator light
alerting you that your skin tone is too dark for safe application.
Try using the device on a different body
part or contact Silk’n support.
>>
Move the treatment surface to another area of skin. Administer one pulse at a
time at your chosen energy level. Use the pressure marks the device makes in
your skin to guide you for proper positioning of the next pulse, avoiding both
gaps and overlaps between pulses. Flash&Go Express can be applied in two
ways: “Pulsing” and “Gliding”.
>>
Repeat the process starting again with Step 5.
